Trim Saws For Sale

HMC MDS50 Drop Saw Trimmer s/n 076-00

2002 HMC ET-10 Double End Trim Saw.

HMC 2-Saw Trimmer Model ET-10,;Complete with the following features: --16′ capacity. --Push Button Setworks. --Left hand (feeds from left to right). --Cuts up to 8″ thick. --Belt Conveyor for waste.NOTE: Removed from service and it was running just fine at the time of removal. Stored outside.

Trim Saw: 6-Head System includes: Unscrambler, Infeed Deck, Auto Loader, Control Panel with Color HMI

480V | Serial # TS-1014-06 | Ran when disconnected

drop trimmer, 9 blades, up to 18' long capacity, air cylinders on heads, electric powered, price does not include going through shop

LSI Right Hand 20' Drop Saw Trimmer with Even End Rollers

New Never Installed 2007 Mill Tech Precision End Trim Saw; Clam shell Opening P.E.T Trimmer with 2 Banks of Motorized Saws; Right Hand Lumber Line; Each Bank with W/Zero Saw & 3 P.E.T.Saws W/Infeed System; Operates on Skip Lug Basis with Mill Tech; Inches & Centimeters

10 HP | 230/460 volts

Morgan Trim Saw 5' Capacity

N&A Air pop up trim saw

Newman KM-16 6 head trim saw, hyd drive on heads, includes 2 conveyors-1 for material and 1 for waste, good condition and ready for production

Newman KM-16 Overhead 5 Head Trim Saw

Newman K 2S Double End Trimmer

8 Head Drop Saw 40' x 14' 5 Strand lumber Deck (Infeed) 16' x 5' 5 Strand Lumber Deck (Infeed) 16' x 5' High 8 Strand Unscrambler (Infeed) 100' x 24" Scrap Conveyor (Outfeed) Drag Chain Underneath (Outfeed) 24" Roll Case (Outfeed) Electric Disconnects And Controls Optional 4 Strand Roof Top Transfer Optional 82' Of 5 Strand Lumber Dcck

Newman K20 Trim Saw (2) Blades - Aprox 20" diameter Infeed & Outfeed decks

K-20 Like New 12’ I, F10’O, F 20’ Waste belt, Soft Start, All Controls

Newman KNO 24 lumber trimmer, (9) station drop saw, will pass rail tie’s, includes waste conveyor & infeed this saw is out and ready to load in your truck. Ref #188

9 Blade station w/ individual motors, built-in powered waste conveyor Working when removed from service in 2018. Removed from service because plant ceased operations.

Newman End Trimmer K 20 MAXIMUM CUT LENGTH: 20' (6.1 m) 20' (6.1m) MINIMUM CUT LENGTH: 6' (1829 mm) 4' (1219 mm) 6' (1829 mm) MAXIMUM CUT THICKNESS: 7? (178 mm) 7-1/2? (190 mm) ACCURACY: +/- 1/32? (0.8 mm) +/- 1/32? (0.8 mm) FEED SPEEDS: 20 to 60 FPM (6.1 to 18.3 m/min.) FEED CHAINS: #60 roller chain #60 H type mill chain FEED DRAGS: 6 at 22? (559 mm) intervals 6 at 22? (559 mm) intervals SAW BLADES: 22? (559 mm) carbide, 60 teeth 1-1/2? (38.1 mm) bore, 10 gauge (3.4mm) 2 FLOOR SPACE: 20'-8? (6.3 m) x 6' (1.8 m) 20'-8? (6.3 m) x 6' (1.8 m) WEIGHT: Approximately 3500 lbs. (1590 kg) Approximately 3500 lbs. (1590 kg) 1`fixed saw and 4 movable saws 7.5HP each new electrical starters 1.5HP variable speed drive