Band Resaws For Sale

G Tek Grade Runaround Band Resaw with Complete Runaround System

G Tek Single Head Grade Band Resaw With Complete Run Around System, Cab and Set works, 5 Way Seperator. Just about the Same as a Brewco B-1600. Additional Pictures available on Request

Go Fast 5-Head Resaw Unit was cut into two pieces and can be put back together with a weld in the middle. Approx layout is 31' x 8'

Go Fast Single Head Resaw

Go Fast Resaw 15 HP Motor Put under power to test, never put into production.

RESAW-RM6X6 6x6 Master Return Resaw - ¼” – 6” Tall Cut Height, 6” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Powered Belt Return w/ Adjustable Height Sheer Plate - Top Mounted Powered Tire Hold Down Wheel - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -1" Blade - 10 HP Motor (220/1/60 TEFC) - Completely Prewired for 220V Single Phase - Motor Starters with Start/ Stop Buttons and Circuit Overload Protection - Mounted at Operators Station - 39 FLA -Dimensions: 132” L, 96” W, 53” H - Approx. Weight: 1840 lbs

6x8 Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Operator Return Table - Self- contained Hydraulic System: Adjustable Infeed Speed (0-150 ft/ min) - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 84” L, 90” W, 48” H - Approx. Weight: 1400 lbs 6x8 Slave Resaw - ¼” – 6” Tall Cut Height, 8” Wide, Unlimited Length Capacity - 4” Dust Connection (No dust collector required) - Heavy Duty 2-7/16” Blade Arbors and Bearings - 20” Band Wheels - Air Tensioned Blade Mechanism - Self- contained Hydraulic System Runs off First Saw - Easy Crank for Adjustable Blade Position - 3” Right Side Fences - Feed Belt Height: 34” -Dimensions: 60” L, 90” W, 48” H - Approx. Weight: 1340 lbs - (2) 10 HP Motors (220/1/60 TEFC) 2 HEAD Resaw Control Panel - 220V Line Voltage (Single Phase) - 16" Tall X 16" Wide Enclosure (UL Type 1,3R,4,12) - 120V Control Voltage - Service disconnect in panel door - (2) 10HP 220V Motor starters, breaker w/OL - (2) Start/ Stop buttons for each motor w/ legend plates (Head 1, Head 2) - (1) Emergency Stop Button w/ legend plate- Completely for 220V, Pre-wired Motor Starters with Start/ Stop Buttons and Circuit Overload Protection 5' Roller Case Section with Adjustable Legs - 16ga Rollers - 2 Leg Sets with Braces - Height Adjustable from 26" to 32" - Galvanized Finish (Not Painted)

Grizzly G0919 12" 2 Head Resaw

Heartwood 3-Head Resaw

High Point 12" Resaw with Return Conveyor

HMC 4800 horizontal resaw. This saw is made by Pinheiro for HMC, quality and speed 4" -5” band, includes. New electronic setworks, (no conveyors), excellent stand alone machine, (ref #200)

HOLYTEK HP-11P Horizontal Resaw -- Hydraulic Feeding conveyor, hydraulic pump with 3 HP motor -- Main saw motor 20 hp. Specifications: -- Working width capacity 12“ (300 mm) -- Variable Feed Speed 0- 17 m/min (0 to 55 FPM) -- Thickness capacity 4mm to 125 mm (.11/8" to 4.92") -- Conveyor tilting 0 ° to 7° -- Electroni display of cutting height -- Blade Capacity 4270 X 25 X 0.89 mm. -- Wheels Diameter 725 mm -- Return conveyor on machine top

Holytek heavy duty band vertical resaw Model# HB-900H

Jocar MDL 1600-23063 Horizontal Resaw System w/125HP Motor, 40' Outfeed Rollcase, Infeed Power Pack, Tipple System, Infeed Rollcase, Cant Positioner, Cant Turner, 20HP Hyd Power Pack, 50HP Power Pack System, Cleereman 5' x 6' Control Cab & Computer Setworks.

Maintenance Machine Company Vertical Line Bar Band Resaw.

McDonough 54" center split resaw, older, cast-iron version with 50 HP, 220 Volt, 3 phase motor. Resaw uses 6" blades. Wheels have 6 3/8" face. Price $6,800 O.B.O. Call Brian 336-269-1238 for more details and pricing.

McDonough 62" Linebar Resaw S/N 62M: 1.25" thick bottom wheel, .75" thick top wheel, mechanical weight strain, swing door to change saw, 150 HP electric motor and v-belt drive (no belts); Linebar with 3 chromed press rolls, hydraulically driven, Temposonic setworks with cylinder, 5 bed rolls; hydraulic power unit for feed rolls and speed control; Infeed with slab lifters, bed rolls, and air operated cant turners; 14' landing table with rooftop chain; 12' runaround landing table with rooftop chain; 7' outfeed runaround with tipples. Located in VA. Removed from service and ready to load on your truck. $49,000 OBO.

54" Horizontal Resaw Wide Blade Excellent Machine 400K Replacement Cost

This Resaw was originally built in 1995. Left Hand, 6 1/4" wide Wheels for 7" wide x 26' long bandsaws. Air Strain, Pressure Guides, 4 Roll Hydraulically driven Feedworks, Top Wheel Guard, and 60HP Motor and Drive package. Top and Lower Wheels will have new Wheel Bearings installed. Wheels will be resurfaced, balanced and painted. 4 Roll hydraulically driven Feedworks with 12" Roll opening outside the sawline and 6" Roll opening inside the sawline. Once rebuilt, this Resaw will come with a same-as-new 1 year warranty.

54" | 480V