Forklifts For Sale

Hyster Diesel Forklift 3 Stage Mast Side Shift 48" Forks

Very good, clean machine, in excellent running condition. Side shift and forks included.

Capacity: 36,000 lbs @ 48" LC. Hours: 8,800. Mast Specs: 156"/212" with side shift and independent fork positioners. Forks: 8 ft. Features: Fully loaded with tilt-over cab, heat, and AC. Condition: Excellent original paint. No broken glass. Great tires all around. Call for delivered price.

Capacity: 62,000 lbs @ 48" LC. Hours: 1,388 hours. Mast: 143" collapsed height / 124" max forks height two-stage mast. Attachments: Side Shift and Fork Positioner. Engine: Cummins QSB 6.7L 270HP Tier 4 Final. Transmission: ZF Powershift Transmission. Carriage: 129" wide. Call for delivered price.

2013 Hyundai 25L-7A Pneumatic Tire Forklift with 3,300 hours. Max Fork Height 10.83ft in Operating Weight 8,302.7lb Length To Fork Face 8.48ft in Overall Width 3.81ft in Overall Height - Mast Lowered 7.14ft in Wheelbase 5.42ft in Ground Clearance 4.26in Height To Top Of Overhead Guard 7.09ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2015 JLG 6042 extend a boom fork lift nice tight and dry machine 2,150 hrs. $38,500.... Call eddie at 931-seven 04-7852

2014 JLG G5-18A Stand-Up Reach Forklift with 1,157 hours. 74 hp, Max lift Ht. 18.05ft in, Max Forward reach 10.83ft in. Lift Capacity 5,500 lbs. Operating Weight 10,800.5lb 12.6ft in Height 6.4ft in Width 6ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

2006 JLG G6-42A Stand-Up Reach Forklift with 4,093 hours. Max Lift Height 42ft in, Max Forward Reach 28.97ft in, Lift Capacity 6,600 lb. Operating Weight 20,399.4lb Length To Fork Face 17.72ft in Width Over Tires 7.91ft in Overall Height 7.81ft in Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

KALMAR MODEL KLMV42-1200 Container LoaderSpecifications: --95,595 LB capacity @ 48" Load Center. Rebuilt Cummins L10 Diesel engine (32,462 hours) and transmission, Spreader and hydraulics rebuilt. -- 394" lift, full cab, air brakes. -- Sideshift, tilt and fork adjustments, 5 valves. -- Toplift 20' - 40' Spreader w/ 77,162 lb capacity. -- 125,443 lb. Operating capacity.

2021 Linde H80D Pneumatic Tire Forklift with 3,494 hours. Standard Lift, Overhead Guard, and Enclosed Cab. Diesel powered with Lever Transmission. Fork Length 58.5", Lowered Ht. 115", Max Ht 148". Tires have 80% tread remaining. Weight: 14,830 lb Length: 138.9" Width: 87.8" Height: 108.1" Disclaimer The information is the best of our knowledge at the time of the listing. The price may change without notice and additional charges may apply, including freight, taxes, duties, tariffs, quarantine, etc.

New Hangcha FP25C/CPYD25 ForkliftSpecifications: 4,700 Lbs LP cushion unit, Sideshift, 3 Stage full free lift mast, Cushion Tire 4 Wheel Sit Down, LP Gas, Internal Combustion Engine, Powershift transmissionFeatures: -- Travel Speed (Loaded/Unloaded): Approximately 11/12 mph -- Gradeability (Loaded): Approximately 20% -- Service Brake: Hydraulic -- Parking Brake: Manual/Mechanical -- Seat: Adjustable, Steering: Power SteeringDimensions: Overall Length: Approximately 95 inches (varies with fork length), Overall Width: Approximately 42 inches, Overall Height (Overhead Guard): Approximately 83 inches, Wheelbase: Approximately 58 inches, Ground Clearance: Approximately 3.5 inchesNOTE: This will be the last item loaded out. The above specs are taken from literature and considered accurate. As always please take advantage of the inspection period to verify. Items seen in the background are NOT a part of this Lot.

74 hp Ecomax T4i turbocharged interim Tier 4 Perkins Diesel Engine. Lift Capacity of 6000 lbs.149 inches overall length without forks. 77 inch Forks. 89 inches overall width. Height to top of overhead guard: 85 inches. 6 inches of mask side shift. 45 degree mask tilt forward. 12 degree mask tilt backwards.

Taylor Forklift tight machine

MLS Number 13019231 2018 Taylor X330S Forklift 8991 hours 33,000 pounds capacity 48,600 chassis weight 114" forks 132" lowered height 236" max height Tires 100% SS/FP

MLS Number 13417095 2016 Taylor TN520S Forklift 12794 hours 52,000 pounds capacity 75,330 chassis weight 60" forks 164" lowered height 106" max fork height Pneumatic tires 90% Diesel

MLS Number 13438554 2019 Taylor XH-350L Forklift 18529 hours 28,400 pounds capacity 57,040 chassis weight 102" forks 180" Max fork height Sideshifter, fork positioner Dual pneumatic tires Drive 100% Steer 50% 4 hydraulic functions

MLS Number 13438556 2019 Taylor XH-350L Forklift 17014 hours 30,200 pounds capacity 57,040 chassis weight 102" forks 172" lowered height 180" max fork height Dual pneumatic tires 95% Sideshifter, fork position

MLS Number 13438557 2016 Taylor TN520S Forklift 21253 hours 52,000 pounds capacity 74,400 pounds chassis weight 60" forks 164" lowered height 106" max fork height Drive tires 80% Steer tires 95%

Capacity: 50,000 lbs @ 50in LC. Hours: 10,727. Mast: Two-stage ultraview mast (197"/216"). Forks: 100" (3.3" x 14" x 100") Attachment: Side Shift and Fork Positioner. Engine: Cummins QSL9 TIER 4F. Dana TE-17 3-Speed powershift Transmission. Call for delivered price.

Capacity: 100,000 lbs @ 48" LC. Hours: 18,953 hours. Cummins QSX15-C400HP Tier III TPEM Electronic Turbocharged w/fuel cooler. Powershift Transmission - 4 speed w/Declutch. Modulated, Electric Shift Control and APC-120 with push button transmission shifting on joystick mounted on the right side of the seat. Rigid Ultra-VU 24, 97" Log Clamp Carriage with Kickers and 108" Forks. Note: Good Running conditions and ready to work. Call for delivered price.