MATTEI ERC 1018L, 25 HP Rotary Vane Compressor (105 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design with 81 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends; rotor stator unit (RSU) is the rotor which is simply supported by (2) white metal Babbitt bushings that routinely deliver > 100,000 Hours of life. -- 25 HP ODP Motor; 105 CFM @ 125 PSIG; air cooled aftercooler with 18° F approach temperature'; 3-stage oil separator produces 3 PPM in compressed air, automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling, and lubrication. -- An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation; automatic with modulation; 1" dia. air outlet.

MATTEI ERC 507L 10 HP Rotary Vane Compressor (43 CFM @ 125 PSI)Features: -- No wear on compressor's moving mechanical parts; pulse-free air; low oil volume and consumption. -- Direct-coupled compressor and motor; slow 1,800 RPM; compact, quiet design - 77 dB (A) in an open-frame design.Equipped with: -- Bearingless air-ends - rotor stator unit (RSU) is the rotor which is simply supported by two (2) white metal Babbitt bushings that routinely deliver >100,000 hours of life. -- 10 HP ODP motor; 43 CFM @ 125 PSIG; air cooled aftercooler with 18°F approach temperature, 3-stage oil separator produces 3 ppm in compressed air. automatic drain valve; cleanable filter.Complete with: -- Efficient oil injection system guarantees a perfect holding among the moving parts, cooling and lubrication. An oil film on the stator's inside surface prevents the moving parts from wearing by avoiding a direct contact with the blades. -- Automatic load/no load, load matching modulation, automatic with modulation; 1" dia. air outlet.

MATTEI BLADE 7 LX-TM-SE, 10 HP Tank-Mounted Rotary Vane Compressor w/Refrigerated Air Dryer ( 39 CFM @ 115 PSIG) RELIABLE ROTARY VANE AIRENDSBLADE features proprietary single-rotor stator unit (RSU) that incorporates MATTEI's legendary white metal Babbitt bushings on the back and now an oversized radial ball bearing on the front to address the side load created by the belts. MATTEI BLADE compressors are engineered for 24 hours/day service with exclusive Meehanite® iron blades, designed to last 100,000 hours.Features: -- MATTEI BLADE Series Air Compressors combine vane technology with dual "V" belt transmission to provide industry leading performance at affordable prices. -- As quiet as 61 dB(A), with speeds as low as 1,050 RPM, and operating pressures from 115 PSI to 175 PSI, BLADE is the ideal solution for small woodworking cabinet shops and manufacturers, body shops, mechanical shops, and other manufacturers.Equipped with: -- 10 HP TEFC motor, 39 CFM @ 115 PSIG; full-voltage motor starter, air-cooled Aftercooler, MAESTRO XB controller with Continuous and Automatic operating modes with standard load/unload operation on all models; MATTEI Rotor Oil 8000 F2 synthetic oil.Includes: -- 80-Gallon ASME Air Receiver Tank; Refrigerated Air Dryer, Pressure Gauge, Safety Valve, Filter, Oil Separator.

MATTISON 229 Push Feed Moulder4-Head Push Feed Moulder, 4" x 10" capacity. -- Head sequence: 10 HP Top head, 10 HP left head, 10 HP right head, 10 HP bottom head. -- 20 HP feed motor. -- 2-1/8" dia. top and bottom spindles; 1-13/16" dia. left and right spindles. -- Includes (6) extra heads that go with the machine.Approximate dimensions of 11 feet long, 4.5 feet deep, and 5.5 feet tall. The machine weight is approx. 5 Tons.

MATTISON Model 228 Push Feed Moulder ( 4 ) HeadsSPECIFICATIONS -- 4-Head -- 16" x 6" width cap. -- Roll FeedHead sequence: --Top 20 HP, left tilting 7.5 HP, right tilting 7.5 HP, bottom 20 HP motor -- 2-1/8" dia. spindles and all heads jointed -- Sectional bed plates.Equipped with & Features -- Assortment of cutter heads -- Tools & wrenches, and factory dust hoods. -- List of heads with the machine :Width Qty2.5 11.5 12 93 34 55 16 28 510 216 1 NOTE : Some spec's have to be verified

MATTISON 69-42 MATTI-MAX Heavy Duty Automatic Rotary, high production Turning Lathe.Microprocessor controlled for quality turnings and ease of setup; 42" long turning cap. with rotating rear arbor, 4" x 4" max. and 3/4" x 3/4" min. stock size. -- Drives & Speeds: Equipped with: 20 HP - 2,700 RPM Cutterhead Drive, 2-5/8" dia. arbor with variable speed, 2 - 45 RPM stock-rotational speed via 1.5 HP DC drive (reversing) & self-contained hydraulic unit for precise feed control.. -- Complete With: Automatic hopper feed; MATTI-MAX microprocessor-based PLC controller with keypad entry; machine functions & operations parameters are set directly from the control; RPM of workpiece and feed rate can be programmed to vary during the cut. Matching the feed rate to the stock-rotational speed produces an efficient cut -- Features: MATTI-MAX also allows rough cutting at higher speeds (especially rounding of corners) and fine finish cutting at slower speeds. . Pneumatic tailstock with dual pressure to insure penetration of spur center at high pressure and can be adjusted lower for small dia. turnings. -- Total electrical load 27 Amps.

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size: 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication.. --4-Speed Feed: 62 - 93 - 124, & 186 FPM.

MATTISON - 202, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,400 RPM Saw arbor motor, 9" - 14" max. blade capacity, 1-1/2" diameter arbor, overhead arbor design. -- 4" Max. depth of cut, 13" min. stock length, 24" max. rip capacity to the right of the blade, 77" x 65" table size.Equipped with & Features: --Overhead holddown with: (6) Pressure rollers, (3) front and (3) back; 2 HP feed drive, (4) feed speeds of 56 - 84 - 112 & 168 FPM (fixed at 25 FPM ).

MATTISON 404 Straight Line Rip Saw;Specifications: --25 HP - 3,600 RPM Direct drive arbor motor; --14" dia. max. saw blade cap. (9" smallest dia.), --1-1/2" dia. arbor; 4" thickness capacity. -- Table size 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column, and 24" rip distance to right of gauge. --Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. --Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds 62, 93, 124, & 186 FPM

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 20HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capy. -- Table size: 65" x 77" Long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column and 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll, 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (2) feed speeds of 50 & 100 FPM. -- Laser light -- 480V to 240V Transformer -- Comes with some 12" 30 Tooth bladesNote : Seller claims the saw will give a glue line

MATTISON - 404, ...Straight Line Rip SawSpecifications: -- 15 HP - 3,600 RPM Direct drive arbor motor; 14" dia. max. saw blade cap. (9" smallest dia.), 1-1/2" dia. arbor; 4" thickness capacity. -- Table size of 65" x 77" long. -- 30" Distance from saw to left edge of table. -- 24-1/4" Between saw & column; 24" rip distance to right of gauge. -- Top roller holddown with 7-1/2" shortest stock handled under (1) roll; 15" under (2) rolls.Equipped with & Features: -- Overhead cutting design with single cast chain links. -- Chain with automatic oil lubrication. -- 2 HP Feed motor with (4) feed speeds. -- (2) Carbide rip blades.NOTE. Comes with a 208 Volt Transformer.

Heat treated and dynamically balanced 36" aluminum disc. -- Commercial duty 5 HP motor base mounted with multiple drive belts. -- Heavy cast iron 16" x 46" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and rack and pinion tilting of the table. -- Sanding station is mounted to (4) 3-1/2" heavy columns. -- Heavy bolt-down cast iron base. -- Optional: Motorized table elevation add.....$16, Motorized table elevation with limit switches add....., Electric brake add....., Circular attachment add....., Miter gauge add..... Hoist (chain drive lift for heavy parts) add..... JIL package (oil/dust proof switch components) add.. OPTIONS QUOTED UPON REQUEST.

Heat treated and dynamically balanced 18" aluminum disc. -- Commercial duty 1.5 HP direct drive motor. -- Heavy cast iron 10-1/2" x 24" table w/miter gauge slot. -- Easy precise tilting of the work table with 45° forward and 30° back. -- Rack and pinion adjustment of the table rise & fall and manual tilting of the table. -- Sanding station is mounted to a heavy column. -- Heavy bolt-down cast iron base. -- Optional: Upgrade to a 2 HP motor add.....$240, Miter gauge add.....$270, Rack and pinion movement of the tilt add....$400, Single Phase 1.5 HP motor add.....$120.

AAF PULSE-PAK 21-3H Pulse-Jet Cartridge Dust Collector. (3H) is three-high filter elements. (21) is the total number of Panel Pak V's.The Panel Pak filter element has two flat panels of pleated media in a Vee-Configuration allowing installation and change-out with minimum time and effort. Each cartridge has its own gasket ensuring a positive, air tight seal. -- Consists of two modules: one containing (9) 3x3 filters and the second contains (12) 4x3 filter cartridges, for a total of (21) cartridges. -- Housing dimensions: 191.75" High (with 48" hopper clearance), 104.25" Wide, 94.25" Depth, and Weighs about 6,400 Lbs. -- Air consumption about 6 cubic feet/hr. at 90 PSI of clean dried air. -- Fan and Airlock available at extra cost. please inquire.

ACCU-SYSTEMS H49 CNC BORE, GLUE & DOWEL INSERTER: -- Specifications: (2) Working zones and an overall 49" max. width capacity. --(1) CNC Controlled head assembly with rapid (side-to-side) traverse, assembly with boring, gluing & insertion unit, 1 HP - 18,000 RPM drill motor. -- (4) Vertical pneumatic hold-down clamps, function selector control for boring only or doweling, adjustable drilling speed. -- 1-9/16" (40 mm) Max. dowel length, setup for 8 mm dowel dia.; height adjustment up to 1-1/8" material thickness with digital readout. -- Operator Interface: CNC "Color Touch-Screen" Controller for function & part programming and program storage. -- Complete with:(1) 12" Dia. vibratory feed hopper. Totally sealed electronically metered glue system with 1-button flushing. -- 100 PSI high power glue pump, 2-1/2-gal. glue tank. Anti-slip table surface. 49" "X" axis cap. -- Rack & pinion drive, and centralized dust collection manifold.

This is for a pair of fully enclosed and drive through Semi Downdraft paint booths with On The Roof of the booth heated air make-up that are connected by a cross passage room/ paint room. There are actually (2) two booths that are assembled end to end making the overall length of Each tunnel 55' 9" long (see layout drawings) Also a Paint mixing room with presurization and heat is included connecting the two long booths. There is also a presurized and heated paint mixxing room (see specifications below) that comes with this equipment. See layout drawings in this listing attachments,The equipment has low usage and is currently set up. price does not include tear down but that can be quoted. Booth Description:Dual Skin Space Saver - 28’ l x 14’4"; w x 13’1"; h External DimensionsDrive ThruSide Service Door with Observation Window IncludedHorizontal Intake - DF 1.2 Mil BTU / 14,000 CFM / 10 HP / ADH 500 / UPGRADEExhaust Bridge - 30"; Tube Axial Fan / 5 H.P. Motor / 12,500 CFMSmart Pad Control Panel - (1) 10 HP / (1) 5 HP / Burner Voltage OutputSmart Pad Control PanelVFD for a 5 HP Single Motor 480 V Three PhaseVFD for a 10 HP Single Motor 480 V Three Phase480 / 277 V Three Phase with 120 V Single Phase Burner Circuit(10) Upper Gable and (4) Lower Vertical Lights - 4’28"; Duct Work Package - 15’ (Intake & Exhaust)LED Upgrade per FixturePass Between Room:AccuMix Dual Skin Mixing Room 8’ w x 16’ d - Attached Two Sided12"; Duct Work Package - 15’ (1 Exhaust)LED Upgrade per FixturePaint Mixing Room:AccuMix PRO Mixing Room 8’ w x 10’ d GalvanizedWhite on White Option for a Mixing RoomPRO Prep - 24’ l x 24’ w x 12’ h Above Ground Solid Back with (1) ExhaustPRO Stand Alone Unit - 1.2 Mil Btu Burner / 10 HP Motor / 14,000 CFMRear Wall Exhaust - 30"; Tube Axial Fan / 5 H.P. Motor / 14,000 CFM UpgradeSmart Pad Control PanelVFD for a 5 HP Single Motor 480 V Three PhaseVFD for a 7.5 HP Single Motor 480 V Three Phase480 / 277 V Three Phase with 120 V Single Phase Burner Circuit(4) Ceiling Mounted Lights Inside Access - 4’ Four Bulb28"; Duct Work Package - 15’ (Intake & Exhaust)Curtains - 12’ l x 9’ h SolidCurtains - 24’ l x 9’ h Solid9x24 wallLED Upgrade per FixtureLED Upgrade per Fixture12"; Duct Work Package - 15’ (1 Exhaust)

ACT 3-12 Cartridge Dust Collector Cartridge style downflow dust collector rated at 6,000 CFM. Heavy-duty with 7 and 10 gauge construction. Specifications: -- Blower, 15 HP rated at 6,000 CFM. -- (12) Nano Elite, MERV 15, cartridge filters with 3,046 sq. ft. of filter media that are 99.9% efficient. -- Reverse pulse filter cleaning system. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with quick-lock easy-access filter doors. -- Magnetic motor starter and disconnect. -- 16" inletEquipped with: -- TCBI 15 HP Blower with direct drive, top mount. -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (6) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- Drum Lid Latch Ring. -- Motor starter with disconnect. -- 10 year workmanship and materials warranty -- Made in the USA

ACT 4-16 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 8,000 CFM. Specifications: -- 20 HP Direct drive, top mounter blower rated at 8,000 CFM @ 10" w.c. -- (16) Nano Elite, flame-retardant, Nano-Fiber merv 15, cartridge filters with up to 4,064 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter.Equipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (8) pulse valves. Goyen diaphragm and solenoid valves -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. Options: -- Fan outlet damper. -- Fan outlet silencer. Other models available, please check with the Product Manager10 year workmanship and materials warranty -- Made in the USA

ACT 3-6 Cartridge Dust Collector Cartridge style downward flow dust collector rated at 4,000 CFM. Specifications: -- Blower, 10 HP rated at 4,000 CFM @ 10" w.c. -- Holds (6) Nano Elite, merv 15, cartridge filters with up to 1,524 sq. ft. of filter media that are 99.9% efficient. -- Pulse control timer board with built-in digital pressure gauge. -- Drum lid with latch kit, quick-lock easy-access filter doors. -- Magnetic motor starter panel. -- (6) Filter Upgrade to ACT Nano-Elite, flame-retardant, Nano-Fiber media with industry best Merv 15 efficiencyEquipped with: -- Automatic reverse jet cleaning via compressed air, (1) pulse valve per (2) cartridges for a total of (3) pulse valves. Goyen solenoids and diaphragm. -- Heavy Duty steel legs position unit approximately 4' above the ground made with 7 and 10-gauge construction. -- 12" in-let. -- Silencer for TCBI 1010 year manufactures materials and craftsmanship warranty . Made in the USA

ADVANCE LIFTS P-6036+M Scissor LiftThe P-Series lifts are Advance Lifts most popular series as they fit a wide array of manufacturing applications.SPECIAL FEATURES & BENEFITS: -- These units are equipped with the patented “Platform Centering Devices";, which doubles or triples lift life. -- All of the controllers are Underwriter Laboratory listed assemblies. -- These units are fully primed and finished with a baked enamel finish. -- The cylinders are machine grade with clear plastic return lines. -- All pressure hoses are double wire braid with JIC fittings. -- The reservoirs are mild steel. -- These units conform to all applicable ANSI codes.Specifications: -- 6,000 Lbs. capacity. -- Platform size 36" x 72" (Min. Platform Size: 24" x 48" Max. Platform Size: 48" x 72") -- Max. End Load Capacity 4,100 Lbs. -- Max. Side Load Capacity: 3,500 Lbs. -- Baseframe Size: 24"" x 48". -- Lowered Height: 6.5". -- Raised Height: 42.5". -- Approx. Speed Up: 27 sec. -- Internal Motor: 2 HPWarranty 10 Year Structural / 250,000 Cycles - 1 Yr Parts and Labor