ALLEGHENY - 18-250C, ...Paper Shredder -- 20 HP Motor -- (250) Sheets per pass -- 1/2" Straight cut -- Loaded onto your Truck

ALLEGHENY 20-350C DOCUMENT SHREDDERSpecifications: -- 40 HP Motor -- 7/16" Cut Width -- Feed Opening 20" -- Dimension 70" x 107" x 55" -- Weight 6,295 Lbs

ALLEGHENY - 16-250C, ...Paper Shredder With Baler Cutting Assembly: 16" Horsepower Options: 5 Hp., 7.5 Hp., 10 Hp. Voltage: 208V, 230V, or 460V, 3 phase, 60 cycle Input Speed: 64, 49, 66 FPM Cutter Type: 4 ¼" diameter, Sawtooth Cutter Size: 5/16", ½" (other shred widths available) Dimensions: 37" W x 58" L x 44" H (70"L w/bagholder) Weight (approx.): 1,300 lbsHorizontal baler w/incline conveyor, 2007. Air filtration system included

ALTENDORF F-45 ELMO III 3-Axis Programmable Sliding Table Panel SawSpecifications: -- 133" (3,400 mm) Cutting cap., middle & end locking positions of anodized aluminum sliding carriage, metal guide ways are self-cleaning. -- Motorized tilt, height & rip fence positioning. Equipped with: -- 7.5 HP Main saw motor, (4) cutting speeds of 3,000 - 4,000 - 5,000 & 6,000 RPM with a digital readout on control panel;16" max. saw blade dia. with 30 mm bore. -- Max. cutting height 5-7/8", width between saw blade & rip fence up to 51". Features: -- Display screen at eye-level for ease of operator programming; scoring unit with 1 HP motor, 9,000 RPM with a 5" dia. shimless saw blade; -- Easy programming using a keypad and display screen; digital display of tilt position & cutting depth. Complete with: -- Rear table extension, overhead blade guard w/dust collection. -- Extendable crosscut fence with (2) flip stops, (1) digital readout, sliding table lock mechanism.

--This machine is Lot#001 in an Auction on exfactoryauctions.com - NO RESERVE-- ALTENDORF ELMO CE 3,400 mm (11') 4-Axis Programmable Sliding Table Saw Specifications: Max. cutting length 3,305 mm (130.12"). Max. depth of cut with 450 mm (17.72") dia. blade: 75 - 150 mm (2.95" - 5.91") at 90°; 53 - 106 mm (2.09" - 4.17") at 45°. Dado cap. 15 mm (0.59"). Main saw: 5.5 kW (7-1/2 HP) Motor with automatic brake; blade dia. 450 mm (17.72"); arbor dia. 30 mm (1.18"); arbor tilt 0° - 45°; blade speeds 3,000, 4,000, 5,000 & 6,000 RPM. Scoring saw: 0.75 kW (1 HP) - 9,000 RPM Motor; blade dia. 120 mm (4.72"); arbor dia. 15 mm (0.59"). Equipped with: 14-1/2” x 134” x 36” H Aluminum sliding table with middle & end position locking; fixed table. Main saw blade programmable height & tilt adjustment. Automatic main saw blade height/tilt compensation. Scoring saw motorized rise & fall and Iateral adjustment. "TYPE 1160-160-30" 47” L x 3-1/2” H Programmable rip fence with: 1,300 mm (51.18") Cutting width cap.; 15 MPM (49 FPM) positioning speed; automatic dimensional correction for saw blade tilt. "TYPE 1160-160-31" Programmable crosscut fence with: 3,200 mm (125.98") Cutting cap.; 15 MPM (49 FPM) positioning speed; 700 mm (27.56") cross slide extension; (2) flip stops; sliding outrigger support. Eye level touchpad control with LED Displays for main saw blade height & tilt, rip & crosscut fences. Automatic central lubrication for saw unit tilting with: Digital oil level monitoring. Swing away, parallel blade guard.

ALTENDORF F-45 Sliding Table Saw Specifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.; 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel; 49" rip cut cap. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism; -- 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops.

ALTENDORF F-45 Standard Sliding Table Panel SawSpecifications: -- 3,200 mm Sliding table length, 126" cutting length; 16" main blade cap. (18" blade cap. without scoring), 4-7/8" depth of cut, 51" rip cut cap., 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Manual raise & lower of the main blade, and tilting of saw group from 0° - 45° with digital readout to 1/10th deg., (4) cutting speeds of 3,000 - 4,000 - 5,000 & 6,000 RPM with digital readout. -- Includes: -- Tigerfence positioning rip fence, 19/32" dado capability, sliding table lock mechanism and 31-1/2" x 29-1/2" table extension. -- Complete with: -- Crosscut support table; 2,100 mm long extendable crosscut with (2) flip stops.Note: Missing overarm blade guard assembly

ALTENDORF F-45 Sliding Table Saw Specifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.; 7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. -- Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel; 49" rip cut cap. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism; -- 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops.

ALTENDORF F-45 Sliding Table SawSpecifications: -- 10-1/2' (3,200 mm) Carriage travel, 14" blade cap. with scoring, max. 16" main blade without scoring, 4-1/8" depth of cut with 14" blade, 45° tilting arbor, 15 mm (9/16") dado cap.;7.5 HP main motor, 1 HP scoring motor with 9,000 RPM blade speed. Features: -- Manual raise-and-lower via foot pedal; manual tilt of saw group via hand-wheel, (4) cutting speeds of 3,500 - 4,000 - 5,000 & 6,000 RPM with digital readout;49" rip cut cap with aftermarket digital readout. Complete with: -- Overhead blade guard w/dust collector outlet; sliding table lock mechanism; 800 x 700 mm main table extension, 2,100 mm long extendible crosscut fence with (2) flip-stops and (1) set of blades.

AMERICAN BALER 5042-AT-840 Auto-Tie Horizontal BalerSpecifications: -- Feed Opening: 49-1/2" x 40-1/2" -- Bale size: 42" x 42" x Variable -- Main cylinder: 8" x 66" Stroke -- Main motor: 40 HP -- No load cycle time: 25 Sec -- Under load cycle time: 43 Sec

AMERICAN BALER - PAC 4029-8T30, ...Auto-Tie BalerSpecifications: -- Motors: Twin 30 HP (2). -- Main cylinder: 8". -- Feed opening: 40"; x 29";. -- Charge box: 29"; x 42"; x 49";. -- Normal operating pressure: 2,500 PSI. -- Charge box volume: 34-1/2 Cu/Ft. -- Compressing force: 125,664 Lbs. -- Bale size: 30"; x 43"; x Variable.Features: -- Automatic wire tier. -- Single tension cylinder.

AMERICAN BALER - PAC-4029-730R, ...Auto-Tie Baler(2) Available !Specifications: -- Motor: 30 HP. -- Main cylinder: 7". -- Feed opening: 40" L x 27-1/2" W. -- Charge box: 29"; x 42"; x 49";. -- Bale size: 30" x 43" Variable. -- Normal operating pressure: 3,000 PSI. -- Compressing force: 115,453 Lbs.Features: -- PARKER PLC controls. -- Regen hydraulics.

AMERICAN BALER 8043-10-120 Auto-Tie Horizontal BalerSpecifications: -- Main cylinder: 10″. -- Bale size: 43″ x 43″ x variable. -- Feed opening: 80″ x 41-1/2". -- Power unit: (2) 60 HP Motors. -- Total ram thrust: 235,620 Lbs. -- Pressure settings: 3,000 PSI. -- No load cycle time: 9-1/2 Sec approx. -- Oil Capacity: 400 Gal

AMERICAN BALER - 5042-10-30: Auto-Tie Horizontal BalerSpecifications: -- Cylinder: 10". -- Main motor: 30 HP. -- Charge opening: 50 x 42".

AMERICAN BALER - 8043H-10150F: Wide-Mouth Horizontal Auto-Tie Baler including a 30° Infeed ConveyorSpecifications: &#9679 Cylinder: 10".&#9679 Motor: 150 HP (Twin 75 HP).Equipped with:&#9679 Wire-tie system.&#9679 30° Drag link incline conveyor: 6 Ft. wide x 13" deep.NOTE: Some electrical wiring has been cut, but the machine is all intact.

AMERICAN BALER - 6042H-830: Auto-Tie Horizontal Baler with Shear BladeSpecifications -- Cylinder: 8". -- Main motor: 30 HP. -- Feed opening: 60" x 42".Equipped with: -- PLC and push-button controls. -- Shearing blade.

AMOS MODEL TS-20 ...Dual Shaft Shredder Specifications: -- --(2) 10HP Motors --High Torque / Low Speed --(2) Shafts --5/8" Hook Cutters --24.25 in x 26.5 in Feed Opening

APEX LS-TS 300 Brush / Denibbing Sander;The Apex LS line of lineal sanders are designed for effective multi-sanding in one pass with a working width of 12"; (300 mm). The LS-T sander has two top sanding heads, one left and one right sanding head with a motorized conveyor. Machine is designed to process the top side of product in a single pass.Function: -- The sanding units are adjustable in height, width, rotation and RPM, in order to set them exactly to suit different shaped profiles and applications. The LS-TS lineal sander incorporates large diameter sanding heads to increase sanding dwell time to achieve aggressive whitewood sanding at increased feed speeds. -- All sanding heads are reversible and can be fitted with double sided abrasives to accommodate for multiple applications such as raw wood sanding, sealer / primer sanding or wire brushing/ distressing. Standard Features: -- Heavy-duty frame design -- Counter rotating large diameter sanding heads -- Conveyor belt feed with four spring loaded hold-down rollers -- Constant height of through feed -- Digital readout counter for sanding heads -- Four – 4"; (100 mm) dust extraction outlets -- All sanding heads have reversible rotation -- Machine can easily be moved with pallet jack, fork lift or rolled on casters Specifications: Thickness of Work-piece 0"; - 4";, 100 mm Conveyor Belt Width 12"; - 300 mm Motor on each spindle 1-1/4 HP Conveyor motor 1 HP Speed of Spindles 100 - 500 RPM Brush height 12"; Top heads / 4"; side heads Feed Belt Speed 10 - 50 FPM – variable 480 Volt / 3 Phase / 60 Hz Total amps - 23 Machine Weight 1,950 Lbs Machine comes with aluminum hubs and loaded with abrasives

ARJES - IMPAKTOR 250, ...Dual Shaft ShredderIncludes Caset and Paddle Shafts - New in 2020Model "Bandit" with the following features: -- Dual shafts with synchronous/asynchronous drive (80,000 ft/Lbs torque)! --Quick change cassette system: Allows simplified maintenance, replacement, or refurbishment. -- Mechanically adjustable side combs (runs open or closed). -- Weighs approx. 15 tons and can easily be transported. -- Wide profile discharge belt. -- Wireless radio remote controls all track & shredding functions. -- Automatic reversing function protects against fracture of the cutting tools. -- Length: 22’; width: 7’ - 10-1/2";; height: 9’-2";; weight: 29,763 Lbs. -- Hopper size: 98-1/2"; x 62";. -- Engine: 220 HP (164.1 kW); VOLVO "T4f". -- Shafts: 59"; 1.5 m Shaft Speed: 11 - 45 RPM -- Torque: (2) 80,000 Ft.-Lbs. -- Conveyor width: 31-1/2"; Conveyor speed: 118 IPS; 3 MPS. -- Discharge Height: 11’-5";. -- Fuel Tank: 92-Gallon. -- Hydraulic Tank: 18-Gallon. --Unlock unparalleled shredding capabilities with the 2020 Bandit ARJES Impaktor 250 Shredder, equipped with advanced features including caset and paddle shafts. This industrial powerhouse is ready to elevate your operations to new heights. This is your opportunity to own cutting-edge machinery that delivers efficiency, versatility, and reliability. --Key Features: 1. Efficient Shredding Mechanism: • The inclusion of caset and paddle shafts ensures a robust and efficient shredding process, making quick work of various materials, from wood to construction debris. 2. Versatility for Multiple Applications: • The Impaktor 250 is designed to handle diverse materials, making it ideal for applications in recycling, waste management, forestry, and more. Adapt to different challenges with ease. 3. Exceptional Mobility: • Benefit from the mobility of this shredder, allowing you to take it to different job sites effortlessly. Its compact design ensures easy maneuverability in various environments. 4. User-Friendly Controls: • Take command with the intuitive control system, allowing operators to adjust settings and monitor performance for optimal efficiency. 5. Safety at the Forefront: • Safety is paramount. The Impaktor 250 is equipped with features such as emergency stop buttons and safety interlocks to ensure a secure operating environment. 6. Output Size Control: • Customize your output with mechanisms that control the shredded material's size, giving you flexibility for specific applications.

//This machine is in an Auction on exfactoryauctions.com// //Link to machine: http://exf.ac/i6e ARMENTIA RE-40-1000DE Vertical Resaw, with Power Feeder Specifications: Throat 16-3/4” Front table size 24” x 36” x 33-1/2” H. Max. cutting height 11". Blade width 3". Equipped with: 25 HP - 1,760 RPM Motor. 19-1/4" Cast-iron wheels. 10” W x 1’ L & 4" W x 1' L Vertical gravity rollers, with 1-1/2” Dia. Rollers on 2” Centers. (2) 2” W x 8” Dia. Sprocket-type feed wheels. Complete with: HOLZ-HER "ET 117" 3-Roll 8-Speed Power Feeder.